Reason Combinator Tutorial – Rhythmic Sound Module

More Combinator advice here with how we created Seasoning Lite – advanced Reason Combinator Tutorial ahead!

Continue Reading

Let Paper Inspire You…

Sometimes the best way to get better at making music is not to think about making music for a second. Cod philosophy aside, let’s take a little look at how paper can be an inspiration…

Continue Reading

Free Analog Synth Samples, Free Sample Pack, Free Limiter VST!

So. Much. Free. Stuff! Free Polivoks analog synth samples pack for Ableton Live, HUGE free sample pack from Sampleism, and a free limiter plugin VST for Mac and Windows!

Continue Reading

P.SUS – Draw the Line Soundtrack

In today’s Music We Love, our musical discovery takes us back in time to the 8-bit glory days that have since been refurbished into the Chiptune genre; here’s a look at P.SUS – Draw the Line soundtrack. Continue Reading

Propellerhead Balance

Balance is the first piece of hardware to come out of Propellerhead, the masterminds behind Reason (and ReBirth, ReCycle, Figure, and so on). We’re really taken with its gorgeous looks and its excellent sound quality, have a couple of reservations about its flexibility outside of Reason and its price, but things – like usual – go deeper than a few words can convey. Read on for our full Propellerhead Balance review…

Build and Controls

Balance really does look like nothing else. In a world of pretty similar looking little boxes, Balance is a treat for your desk. Coated with that almost velour-feeling soft plastic coating, its big dials for your main/headphone levels and input selection buttons are always tilted toward you in a very ergonomically satisfying way. There’s a real sturdy feel to Balance, in a very different way to most other small audio interfaces. While other developers use metal chassis and industrial design, Balance is soft, gorgeous, and sleek. I would feel a little more conscious of it rolling around in a kit bag, but can you blame it for being pretty?

The buttons themselves press well. The indicator lights aren’t very bright, but they get the job done – and in fact casting an eye over the studio, it’s the big bright lights that are the most annoying over time so this is probably for the best. The big dials for main/headphone outputs are lovely, with a completely smooth rotation, and the smaller gain knobs for the inputs are stepped, which helps to ensure you set both inputs to the same level in the case of stereo inputs. It’s a shame there’s no transport button section on the unit, because I think it would really help in a lot of use cases Balance seems to be designed in mind of!

Propellerhead Balance

Inputs and Outputs

It’s not just looks that set Balance apart, though. Despite being a 2/2 channel interface, there are two sets of stereo inputs, two high power mono guitar inputs with pad and two XLR mic inputs, each with 48v phantom power capability. Only two inputs (two monos or one stereo )are capable of being recorded or monitored at a time, but Propellerhead have a point in that – for a home musician at least – even though you may have many things you use to record with, most of the time you don’t record more than two simultaneously. You might have a guitar and mic, perhaps a stereo input coming out of your turntables… but for those occasions where tracking multiple outputs from (for instance) an MPC would save time, or if you’re recording a jam, or even live performance situations where multiple outputs come in handy, you’re out of luck.

Propellerhead Balance

I’d really like to see at least some kind of internal summing so that I could record a mix of all inputs if I wanted, just to record an idea as much as anything else, or even to have a thru for the other inputs so that I can at least hear them. 

I’d have liked to have seen MIDI DIN sockets on Balance, just to make things just that bit more compatible with older gear. Also, because everything’s 1/4” it would have been nice to see a couple of phono to 1/4” adapters thrown in… just to appease some people who might need to pop out to the shop for them so they can plug their stuff in.

You’ll know whether or not having just two ins and two outs is an issue for you, just as you’ll know whether or not the simple input switching is a godsend or somewhat pointless for your setup. If you do have a few different things you use to input – in the studio we had the MPC going into one input, decks another, and a mic connected to perform some test sessions – being able to simply press a button to choose really does make things easy, and perhaps because when you actually want to record you never seem to have the right thing plugged in, it made the ‘studio experience’ just that little bit less technical and more creative.

Propellerhead Balance

Special Features

Taking the technical out of the recording process seems to be one of the main goals Propellerhead had with Balance. If you use Reason then there’s just no setup required at all; it’s a real joy to pair Balance with Reason, and the driverless install – in fact, absence of install – means you can get started with Balance as soon as plugging it in. It even doubles up as a dongle, which means you don’t need to use your Ignition key.

Clip Safe is a nifty feature that pretty much removes any chance of clipping an input. It really is completely transparent, and as long as it’s turned on via a button on the front of the unit, recordings in Reason can be pulled from the brink if there’s any digital clipping. This works by tapping the input at a low level before the adjustable gain stage, so if you do clip, you can swap over. Of course, the SNR’s not going to be as good as a properly calibrated recording, but it’s better to have a little bit more noise than a completely ruined take. That said, if you set your input levels conservatively by habit Clip Safe does become a little redundant. 

Propellerhead Balance

Big Meter and Tuner are nice ideas too; if you record some distance from your screen you can enable a large meter that’s easily visible from a distance that shows input level and pitch accuracy. Unless you trail Balance over to your playing position with a long cable, if the levels are wrong you still have to wander back to the unit to set them, though (and you’ll still have to hit record somehow regardless, another argument for on-unit transport controls), which defeats the object a little bit.

If you don’t plan to use Balance with Reason, you’ll need to install the supplied ASIO drivers in Windows and you’ll lose the cool tricks like Clip Safe and Big Meter. Considering part of what you’re paying for with Balance is a Reason Essentials licence, and you lose some of Balance’s best features when you use it with something else, it’s probably not the wisest purchase if you genuinely don’t want to use Reason.

Propellerhead Balance

Sound Quality and Latency

Of course, most people would prefer to have a couple of channels of amazing quality audio than 10 that sound like a ghetto blaster rolling down a hill in a dustbin. Balance is capable of 24/96 I/O, and fortunately it sounds absolutely pristine. Crisp, clear, and low noise. We tested it against a few things: the Mac’s internal audio, Native Instruments’s Komplete Audio 6, and the Apogee ONE. It stands toe to toe with the KA6’s output, and my personal favourite for home studio level raw audio quality, the ONE, perhaps edges it on the clarity front but Balance makes a great showing. The low noise inputs are excellent, and are really demonstrated with clip safe – even large amounts of amplification provide a pretty crisp sound.

Balance is capable of very low latency, both in CoreAudio and ASIO, but for those times you need direct monitoring its available simply by holding a button down on the unit until it latches. The pedant in me would like to see a form of integration with Reason on the direct monitoring toggle, allowing you to switch off software monitoring from the Balance unit too to make things even less confusing for newcomers, but never mind. 

Software, Price, and Other Considerations

Price is the biggest hurdle that Balance has to leap. Direct from Propellerhead, it’s over €420 – and considering that the bundled Reason Essentials is available for €120, Balance is just about the most expensive 2/2 home/project studio audio card on the market. Is the ability to switch inputs without changing cables really worth all that much, especially when there are other cards of a similar quality with more simultaneous inputs and outputs? To be completely honest, we’d have to say no. However, it’s not quite as simple as that – and I’m not suggesting that all you’re paying for is the input matrix!

Propellerhead Balance

Take a look at online stores, and you may find a very different price to the one that Propellerhead quote direct. In the UK, Balance can be had for as little as £260 (as of June 2012); assuming around £100 value for Reason Essentials makes Balance a much more tempting proposition at this price. Not only that, but Balance qualifies you for a specially price Reason 6 upgrade, and a little arithmetic (counting on my fingers) makes Balance a cheaper proposition still if purchasing Reason 6.5 was always part of the plan. Everywhere that’s offering lower prices on Balance and other Propellerhead software is keen to point out that these are limited time offers, though, just so we’re clear.

I really struggled with the Balance value proposition, and we nearly instigated our first dual  OD score because of how differently we think two people with different use cases will perceive it. Balance is especially good value if you do one or more of the following:

  • Record a lot of voice, miked, or DI’d instruments
  • Don’t own any software so far – perhaps recording to a classic multitrack
  • Own a full version of Reason 1-5, as upgrade to full Reason 6.5 is free. This even allows you to transfer your Reason Essentials licence to a friend!
  • Intend to buy the full Reason 6.5 and an audio interface

And it’s not so good if one or more of these is true:

  • You never record live inputs
  • You have no intention to use Reason
  • You already own the full version of Reason 6.5 (this is somewhat ironic! We couldn’t find a rebate option anywhere, so if you buy Reason before Balance it’ll end up costing you a lot more than buying Balance then upgrading to Reason)


Propellerhead Balance

As a quick side note, Reason Essentials is an excellent piece of software that includes many of the tools that the full version of Reason 6.5 does. To make a broad statement, if you’re planning on using Balance and Reason to record acoustic performances you may find Essentials is all you need, but if you’re a mainly electronic musician you might find yourself wanting for some of the advanced instruments and effects that have been saved for the full version of Reason.

Propellerhead Balance Review: Wrap Up

In short? Balance is a great looking and great sounding card, but in comparison to competing efforts from other similarly priced audio interfaces it’s decidedly light on simultaneous inputs and outputs. Reason Essentials is an excellent piece of bundled software, and the value of the Balance/Essentials bundle will depend on what you want to do with it. We might go as far as to say that those of you who record your guitar/voice frequently (especially if it’s your main method) will have more to love about Balance than those who stay in the box, who might struggle to see where your money went. Weigh up your needs – Balance will either be your best music related purchase for some time or cause you a bit of buyer’s remorse…

Write a Song Using only Piano!

The piano is a wonderful instrument, and can be all you really need to write a song. How often do you hide behind lots of different instruments to create interest in your music when you could just write a better composition?

Continue Reading

How to Make Glitch Drums and Breaks!

Ever wanted to know how to make glitch drums, breaks, or any other glitch based IDM or electronic music? We’ll show you in this video!

Continue Reading

Win Cyclop, Free Drum Samples, Sampler, and Minimoog!

The freebies keep on coming!

Continue Reading

Sugar Bytes Cyclop

We love bass, so we decided to take a look at the latest low end monster synth on the market in our Sugar Bytes Cyclop Review. Cyclop has huge possibilities for dubstep – read on to find out just how worthy it is of your hard earned…


First Impressions

Cyclop is, initially at least, pretty confusing to look at. It doesn’t take too long to get your head around things if you’ve got a sound understanding of basic synth principles, but Cyclop is probably a synth that you’ll get the most out of if you’re already somewhat au fait with synths in general. It’s got a pretty big GUI, with a central section that has multiple pages that have their own subpages, and until you ‘get’ how it all works you might get a little frustrated. Once you do, though, things turn out to be quite logical and the layout of the GUI more or less mimics the signal chain, or at least, as much as it can when that chain can be rearranged.

Oscillators and Filters

Sugar Bytes Cyclop Oscillators

There are two oscillator sections in Cyclop, plus a sine wave sub osc just to make sure there’s always some knee shaking sub on offer. The main oscillator sections allow you to choose an overarching synthesis type and then tweak them further, with FM, saw/double saw/square wave sync, a supersaw creating ‘saw regiment’, a granular wavetable (that supports wav import), a spectral shaping oscillator ‘spectromat’, and a phase distortion unit that creates harmonics out of pushing sine waves out of phase and accentuating their clashes. This is a lot of potential, and if I’m to be completely honest I found myself neglecting the phase stressor and spectromat in favour of the simpler and perhaps more versatile analog sync, FM, and saw regiment types. Over time I think the extra oscillator types will be something I’ll delve into more, as the subtlties of their character starts to win me over. It’s clear that there’s a great deal of sonic potential in the oscillators, though, and even the basic waveforms sound excellent.

Sugar Bytes Cyclop Filters

The filter section is similarly well endowed, with ten different types of filter on offer – high pass, band pass, mid boost, three low pass types, comb, ripple (a sort of band pass/comb hybrid), and band stop. All the filters can be set to operate as formant shifters too, which works especially well when certain filters are combined with rhythmic modulation. All the filters are tweaked to be ‘bass appropriate’; they’re very smooth, and even high resonance settings are accessible without ruining the patch in key pitch zones.

For even more flexibility the oscillators and filters can be run serial, with the sum of oscillator 1 and 2 going through filter 1 then 2 (or the other way around), parallel, with the sum of the oscillators split and running into each filter individually, or in split mode, where oscillator 1 runs to filter 1, oscillator 2 to filter 2. Experimenting with just how much this could change the sound was eye opening, and this semi-modular approach to Cyclop is definitely one of its strong points.


Sugar Bytes Cyclop Modulation

Whilst it generates some pretty gut wrenching bass straight off the bat, it’s the modulation options that set Cyclop apart; rather than creating a sound and then warping and shaping it with DAW automation and further plugins, Cyclop really wants you to program every aspect of your bassline, from the wobbles to the tone changes, in its own GUI.

Each of the main controls on the oscillators and filters can be modulated individually by an ADSR envelope, a ‘sound’ dial, a step sequencer, an LFO, and the ‘wobble’ dial. The wobble is a special control that is really at the heart of Cyclop; essentially, wobble is a tempo synced LFO, and every rhythmic interval – 16th, 8th, etc – can have its own shape. This can lead to some very interesting wobble bass patches, where different LFO speeds have character over and above just the rate at which they bounce between settings. For even more fluid changes, the shapes and rates can be interpolated between each rhythm division. Experimentation is key here, and indeed there’s a randomisation button to help you to do so.

Sugar Bytes Cyclop Rhythm

On top of all this modulation capability, you can even rhythmically automate these modulation parameters from within Cyclop. You can get so deep with Cyclop that it stops becoming about twisting knobs to get a bass sound and more about getting the meat of your entire track, leaving you to simply play notes and let the automation you’ve set up take care of the rest. I didn’t find myself using even 50% of the total capability of Cyclop in most instances, but it’s nice to know that if you have a certain mutation in your head, you can probably achieve it.

Oh, there’s more. On top of all this, the effects (described below) can be turned on and off in sequence, and there’s an amp gate that’s designed to give rhythmic qualities to held notes. In short, a well programmed Cyclop patch can more or less completely take care of everything that makes basslines interesting except the pitches of the notes in them.


Sugar Bytes Cyclop Effects

Sugarbytes’ existing calibre with effects is evident with Cyclop. There’s a whole page dedicated to the internal effects – reverb, delay, phaser, chorus, vinylesque wind downs and ‘scratch’ sounds, loops and pitch rolls, each with their own variations. You can layer these effects, with reverb, delay, phaser and flanger as one choice, the vinyl effects another, loops another and pitch the last, in order to create weird and wonderful sounds.

There’s no way to alter their order in the signal chain, but even if it were possible I don’t think it would make much difference to the final sound. There are, though, individual wet/dry controls for delay, reverb, phaser, and chorus, which gives a little more control over these important effects.

Sugar Bytes Cyclop Distortion

As I touched on previously there are eight separate effects settings available, and these can be selected at will either manually or rhythmically to further mess up the sound emanating from the bowels of Cyclop. You know, in case you didn’t have enough sound mangling options already.

We’re still not done! The main signal (not including the sub osc, which runs separately to ensure it simply provides a pure sine bass tone), as well as the pre-filter signal, can be distorted by one of many models, from bit crushing to saturation to downright nasty overdrive. These are set and forget settings (something had to be), as are a general bass tweaking dial that smooths out the high end ‘woofing’ bass and boosts up lower end grunts and a stereo dial that widens out higher frequencies whilst keeping bass in the middle, opening up the sound to proper arena shaking effect. 


As interesting as Cyclop is, it’s not perfect. First off, it’s a shame it’s monophonic. I realise that Sugar Bytes are aiming specifically at the bass market with Cyclop, but it would be nice to have just a little bit more versatility – and this is something that polyphony would really facilitate.

In addition, modulation is reset on a note off command – which can at times be frustrating. You can of course simply overlap notes to keep things working through the rhythm schedule, but I would have liked the opportunity to turn this functionality off and have the rhythmic modulation independent of note. It’d also be nice to have a note latch for many of the same reasons.

Sugar Bytes Cyclop

An arpeggiator might just be too much to ask from Cyclop, but I feel like with the rest of the features it’s crying out for one!

There’s one thing missing from Cyclop’s internal signal chain, and that’s some kind of limiting device. It would be fantastic to have a multiband compressor inside Cyclop somewhere, but then again I think perhaps because Cyclop already does so much inside its own engine I’m just wishing for the world when in reality dropping an external plugin over the top of Cyclop is a fine workaround.

Wrap Up

Sugar Bytes Cyclop

As you can see, Cyclop is a vastly configurable synth. It’s very much suited to a particular type of sound – the huge, tearing basses that are so popular in dubstep and rougher house music – and for those it’s one of the best synths we’ve tested. It’s not particularly versatile though; the massive amount of modulation possible makes Cyclop able to create interesting, evolving sounds, but it’s all geared towards that sound. Sugarbytes are very open about this, and it’s not a bad thing by any means – it’s better to be the best at one thing than okay at a bunch of them. You can get lost in Cyclop, but when you start to learn your way around it’s a very rewarding piece of software.

Win a Copy of Cyclop (ended)!

 The good folks over at Sugar Bytes furnished us with one full licence of Cyclop to give to one of our lucky readers – the competition’s over now, but make sure you Like our Facebook page and register for free so you’re first to know about future competitions!

Marlow – This Is It

Mid tempo electronic music is getting ever more popular, and Marlow’s latest EP is a great example… Continue Reading

Hello. Add your message here.